CAD Equitek E200
Features
 Dual single diaphragm capsules
Multi pattern: cardioid, omnidirectional, and figure 8
Proprietary internal shock mount
Vocals, acoustical instruments, overhead and room monitoring
All application sound reinforcement and recording
Type: Side address, Dual Capsule Electret Condenser
Frequency Response: 10Hz-18kHz
Polar Patterns: Cardiod, Figure 8, Omnidirectional
Impedence: Low (200 Ohms nominal)
Output Level At 1 kHz: Open Circuit Voltage:-55 dB (0 dB = 1 volt per microbar) 17.8 mV/Pascal Power Level: -34 dB (0 dB = 1 mW per 10 microbars)
Dynamic Range: 132 dB
Equivalent Noise Level: 16 dB Equivalent SPL, A-weighted
Maximum Output Level: With pad, .89 dBV Without pad, 8.9 dBV
Total Harmonic Distortion: Less than 0.15%
Maximum SPL: 148 dB SPL (With pad on)
Signal -To-Noise Ratio: 78 dB (at 94 dB SPL)
Capsule Capacitance: 60 pF
Powering: Minimum Requirements are 48 - 52 Volts Phantom Power capable of delivering at least 8 mA. or CAD EPS-1 high current 24 volt supply.
Connector: Three pin male XLR type
Finish: Durable black urethane. Brass plated front screen
|
UK users CLICK HERE to run a Pound Sterling price comparison.